Wall Coating High Density Polyethylene Waterproofing Membrane HDPE (Self-adhesive with adhesive)

High Density Polyethylene  Waterproofing Membrane---HDPE (Self-adhesive with adhesive)

Application Fields
Railways, highways, water conservancy facilities, municipal bridges, tunnels, gardens, petrochemicals, mining, power plants, garbage disposal and other fields.

Precautions
1 Coiled materials shall be stored in a dry and ventilated environment to prevent exposure to the sun and rain. The storage temperature should not be higher than 45ºC,
2. When the coiled material is laid flat, the height shall not exceed five layers, and when the cubic material is stored, it shall be piled up in a single layer.
3. Prevent inclination or side pressure during transportation.
4. Construction personnel should wear non-spiked shoes or rubber-soled shoes, and it is forbidden to trample on coiled materials at will.
5. After construction lap joint, the joint of coiled material shall be inspected. If damaged parts are found, special sealing materials shall be used to repair them.

Usage:

1. Base layer treatment: Firm, dry, flat, free of sand and oil stains.
2. After the base layer is properly processed, paste the coiled material according to the following procedure: according to the design requirements, cut the coiled material into appropriate sizes, turn the glued side upward, tear off the protective film, lay the first coiled material flat on the base layer according to the baseline, and then lay the second one.

1. After rolling and exhausting the overlapping edges between coiled materials, hot melt welding can be used to strengthen them, or tools can be used to strengthen them to ensure firm bonding of the overlapping edges.
   
   According to the design requirements, the coiled material shall be cut into appropriate sizes, the side with quartz sand shall face up, and the first coiled material shall be laid flat on the base layer according to the baseline, and then the second one shall be laid.

About Our Company
Beijing Dayuwang Waterproof Engineering Cooperation was founded in 1990,the company produces waterproof and anti-corrosion materials mainly, set design and development, technical advice, construction services in one of the high-tech enterprises. Now has more than a hundred middle and senior title professionals.
The company produces sprayed polyazine waterproof coating, polyurethane waterproof coating widely used in engineering, high-quality products and construction has been highly evaluated by the owners, in the industry to establish a good reputation.